No. | Brand | J | H | h | L | G | E | C | T |
5313 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
5324 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7200 B-2RS | CONSOLIDATED BEARING | - | - | - | - | Tr 300x4 | - | - | - |
71804 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7034 MG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
QJ-207 C/2 | CONSOLIDATED BEARING | - | 473.075 mm | 69.85 mm | - | - | - | - | - |
71805 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
5313 C/3 | CONSOLIDATED BEARING | - | - | - | - | M 170x3 | - | - | - |
5313 B C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7201 BG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
QJ-209 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7036 MG | CONSOLIDATED BEARING | - | - | - | 349.25 mm | - | - | - | - |
5202 NR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7024 MG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7208 B | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
QJ-205 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
5202-ZZ C/2 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7048 MG | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7044 MG | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
5202 C/2 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
7202 BG UA | CONSOLIDATED BEARING | - | - | - | - | M 180x3 | - | - | - |
7208 BG | CONSOLIDATED BEARING | - | - | - | - | - | - | 53.975 mm | - |
5314 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | 63.5 mm |
5314 NR C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
5315 M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.394 Inch | 10 Millimeter CONSOLIDATED BEARING 7201 B Angular Contact Ball Bearings | Labyrinth ring:2 x LOR 160; Mass pillow block:160 kg; A1:171.45 mm; PosiTrac Plus contact element:2 x B10724-159; Initial grease fill:878.85 g; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; H2:69.85 mm; Bearing:23040 CCK/W33; Pa:48.9 kN; Size (mm):0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.394 Inch | 10 Millimeter ; |
2.559 Inch | 65 Millimeter x 5.512 Inch | 140 Millimeter x 2.311 Inch | 58.7 Millimeter CONSOLIDATED BEARING 5313 C/3 Angular Contact Ball Bearings | G1:24 mm; Nut for removal:KM 34; B2:146 mm; d1:150 mm; Mass withdrawal sleeve:4.33 kg; G:M 170x3; B1:140 mm; d:160 mm; Hydraulic nut:HMV 34 E; Size (mm):2.559 Inch | 65 Millimeter x 5.512 Inch | 140 Millimeter x 2.311 Inch | 58.7 Millimeter ; |
7.48 Inch | 190 Millimeter x 11.417 Inch | 290 Millimeter x 1.811 Inch | 46 Millimeter CONSOLIDATED BEARING 7038 MG UA Angular Contact Ball Bearings | Basic Static Radial Load Rating Co:255000 N; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:255000 N; Oil Speed Rating n2:2600 rpm; D:215.0000 mm; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:1800 rpm; d:100.000 mm; Fillet Radius ra:2.50 mm; B:82.60 mm; Size (mm):7.48 Inch | 190 Millimeter x 11.417 Inch | 290 Millimeter x 1.811 Inch | 46 Millimeter ; |
2.953 Inch | 75 Millimeter x 6.299 Inch | 160 Millimeter x 2.689 Inch | 68.3 Millimeter CONSOLIDATED BEARING 5315 C/3 Angular Contact Ball Bearings | d3 max.:52.527 mm; Sleeve:S 7x1.1/4; G:34.95 mm; Lock washer:W 07; B1:36.805 mm; Mass adapter sleeve assembly:0.16 kg; B:11.379 mm; Threads per inch:18; B4:12.395 mm; d1:31.75 mm; Size (mm):2.953 Inch | 75 Millimeter x 6.299 Inch | 160 Millimeter x 2.689 Inch | 68.3 Millimeter ; |
1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING QJ-209 M Angular Contact Ball Bearings | Accessories:No Shield, no Seal; Oil Speed Rating n2:2800 rpm; Grease Speed Rating n1:1900 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:234000 N; D:200.0000 mm; d:95.000 mm; Sealed Speed Rating n3:1900 rpm; B:77.80 mm; Basic Static Radial Load Rating Co:224000 N; Size (mm):1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter ; |
0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter CONSOLIDATED BEARING 5202-ZZNR C/2 Angular Contact Ball Bearings | Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:7610 N; Sealed Speed Rating n3:16000 rpm; B:14.3 mm; Basic Static Radial Load Rating Co:4300 N; D2R:28.2 mm; Grease Speed Rating n1:16000 rpm; Oil Speed Rating n2:22000 rpm; d:10.000 mm; Accessories:Two Seals; Size (mm):0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter ; |
13.386 Inch | 340 Millimeter x 20.472 Inch | 520 Millimeter x 3.228 Inch | 82 Millimeter CONSOLIDATED BEARING QJ-1068 Angular Contact Ball Bearings | B:36.00 mm; Fillet Radius ra:2.00 mm; d:105.000 mm; Basic Dynamic Radial Load Rating C:133000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Oil Speed Rating n2:3800 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:104000 N; D:190.0000 mm; Sealed Speed Rating n3:2200 rpm; Size (mm):13.386 Inch | 340 Millimeter x 20.472 Inch | 520 Millimeter x 3.228 Inch | 82 Millimeter ; |
1.378 Inch | 35 Millimeter x 2.441 Inch | 62 Millimeter x 0.551 Inch | 14 Millimeter CONSOLIDATED BEARING 7007 B-2RS Angular Contact Ball Bearings | L:1170 mm; P120°:3400 kN; Cap bolt, rec. tightening torque:850 N·m; J:1000 mm; J1:260 mm; Locating ring:2 x FRB 10/700; Ca:244 mm; bb:202 mm; P90°:4600 kN; Adapter sleeve:OH 3184 H; Size (mm):1.378 Inch | 35 Millimeter x 2.441 Inch | 62 Millimeter x 0.551 Inch | 14 Millimeter ; |
6.693 Inch | 170 Millimeter x 10.236 Inch | 260 Millimeter x 1.654 Inch | 42 Millimeter CONSOLIDATED BEARING 7034 MG UA Angular Contact Ball Bearings | with tapered bore:710 min-1; B:146 mm; Oil:321.210 kN; Static (Cor):16.7 mm; D:460 mm; Grease:3900 kN; with cylindrical bore:600 min-1; rs (min):5 mm; d:280 mm; Pu:2180 kN; Size (mm):6.693 Inch | 170 Millimeter x 10.236 Inch | 260 Millimeter x 1.654 Inch | 42 Millimeter ; |
1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter CONSOLIDATED BEARING QJ-206 C/2 Angular Contact Ball Bearings | d1 ≈:118.25 mm; r0 max.:0.6 mm; Limiting speed:5000 r/min; ba min.:4 mm; B:32 mm; D2 ≈:151.3 mm; b:3.5 mm; Da max.:158 mm; Basic static load rating C0:81.5 kN; ra max.:2 mm; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter ; |
0.394 Inch | 10 Millimeter x 1.181 Inch | 30 Millimeter x 0.354 Inch | 9 Millimeter CONSOLIDATED BEARING 7200 T P/4 Angular Contact Ball Bearings | Fatigue load limit Pu:0.655 kN; Thread grub screw G2:5/16-24 UNF; Calculation factor f0:14; Hexagonal key size for grub screw N:3.969 mm; D:72 mm; Mass complete bearing:0.5 kg; Basic static load rating C0:15.3 kN; d:31.75 mm; B4:6 mm; d1 ≈:46.1 mm; Size (mm):0.394 Inch | 10 Millimeter x 1.181 Inch | 30 Millimeter x 0.354 Inch | 9 Millimeter ; |
3.15 Inch | 80 Millimeter x 6.693 Inch | 170 Millimeter x 2.689 Inch | 68.3 Millimeter CONSOLIDATED BEARING 5316 M Angular Contact Ball Bearings | PG:1/4 NPT; Cap bolt recommended tightening torque:359.3 N·m; Mass pillow block:92.5 kg; Stabilizing ring:SR-30-0; Max. speed for Taconite seal:575 r/min; Cap bolt:4 x 3/4-10 UNC; Adapter sleeve assembly:SNW 130x5.3/8; N1:28.575 mm; P60°:230 kN; S:4.763 mm; Size (mm):3.15 Inch | 80 Millimeter x 6.693 Inch | 170 Millimeter x 2.689 Inch | 68.3 Millimeter ; |
1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter CONSOLIDATED BEARING 7207 B-2RS Angular Contact Ball Bearings | Oil Speed Rating n2:12000 rpm; Basic Static Radial Load Rating Co:17000 N; Basic Dynamic Radial Load Rating C:23400 N; B:17.00 mm; d:35.000 mm; D:72.0000 mm; Grease Speed Rating n1:9200 rpm; Fillet Radius ra:1.00 mm; Size (mm):1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter ; |
0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter CONSOLIDATED BEARING 5202-ZZ C/2 Angular Contact Ball Bearings | Grease Speed Rating Open/Shielded n1:900 rpm; Basic Static Radial Load Rating Co:530000 N; D:580.0000 mm; Sealed Speed Rating n3:0 rpm; Basic Dynamic Radial Load Rating C:312000 N; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:1100 rpm; Fillet Radius ra:2.50 mm; d:460.000 mm; B:56.00 mm; Size (mm):0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter ; |
0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.433 Inch | 11 Millimeter CONSOLIDATED BEARING 7202 B Angular Contact Ball Bearings Video