| No. | Brand | J | H | h | L | G | E | C | T |
| QJ-1030 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7201 BG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7056 MG | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5202-ZZ C/2 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-209 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5315 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-1034 | CONSOLIDATED BEARING | - | - | 31.75 mm | - | - | - | - | - |
| 7208 BG UA | CONSOLIDATED BEARING | - | - | - | 770 mm | - | - | - | - |
| 5202-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-1044 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7036 MG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7200 BG | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-1072 C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7030 MG UA | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5313 B C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5314 NR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5324 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7201 T P/4 | CONSOLIDATED BEARING | 70 mm | - | - | - | - | - | - | 38.8 mm |
| 5313 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-1072 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| QJ-209 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5202-2RSNR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7052 MG UA | CONSOLIDATED BEARING | - | - | - | 330.2 mm | - | - | - | - |
| 7.087 Inch | 180 Millimeter x 11.024 Inch | 280 Millimeter x 1.811 Inch | 46 Millimeter CONSOLIDATED BEARING 7036 MG Angular Contact Ball Bearings | H2:41.275 mm; Initial grease fill:141.75 g; Adapter sleeve assembly:SNW 18x3.3/16; Da:160 mm; P120°:53.4 kN; A2:206.375 mm; End plug (suffix Y):EPR 11; Housing:SSAFS 518; L:349.25 mm; Cap bolt recommended tightening torque:149.1 N·m; Size (mm):7.087 Inch | 180 Millimeter x 11.024 Inch | 280 Millimeter x 1.811 Inch | 46 Millimeter ; |
| 6.693 Inch | 170 Millimeter x 10.236 Inch | 260 Millimeter x 1.654 Inch | 42 Millimeter CONSOLIDATED BEARING 7034 MG Angular Contact Ball Bearings | J min.:666.75 mm; ba:103.188 mm; J max.:749.3 mm; Cap bolt, SAE grade:5; Initial grease fill:3515.4 g; Ca:147.803 mm; da:200 mm; Taconite seal (db shaft position):TER 175; Taconite seal (dc shaft position):TER 164; Da:419.999 mm; Size (mm):6.693 Inch | 170 Millimeter x 10.236 Inch | 260 Millimeter x 1.654 Inch | 42 Millimeter ; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter CONSOLIDATED BEARING 7206 BG UA Angular Contact Ball Bearings | Dynamic (Cr):4.82 kN; B:10 mm; D:35 mm; Bearing designation:PLC 03-79 ; Oil:17 000 min-1; d:10.4 mm; Pu:0.060 kN; Weight:0.07 kg; Grease:12 600 min-1; Static (Cor):1.36 kN; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter ; |
| 2.559 Inch | 65 Millimeter x 5.512 Inch | 140 Millimeter x 2.311 Inch | 58.7 Millimeter CONSOLIDATED BEARING 5313 C/3 Angular Contact Ball Bearings | G1:24 mm; Nut for removal:KM 34; B2:146 mm; d1:150 mm; Mass withdrawal sleeve:4.33 kg; G:M 170x3; B1:140 mm; d:160 mm; Hydraulic nut:HMV 34 E; Size (mm):2.559 Inch | 65 Millimeter x 5.512 Inch | 140 Millimeter x 2.311 Inch | 58.7 Millimeter ; |
| 2.756 Inch | 70 Millimeter x 5.906 Inch | 150 Millimeter x 2.5 Inch | 63.5 Millimeter CONSOLIDATED BEARING 5314 NR Angular Contact Ball Bearings | RG:3/4 NPT; Adapter sleeve assembly:SNW 3034x5.13/16; P90°:180 kN; Cap bolt:7/8-9 UNC; Bearing limiting speed:2800 r/min; H2:60.325 mm; Eye bolt:2 x 3/8-16 UNC; Bearing:23034 CCK/W33; H1:152.4 mm; P120°:116 kN; Size (mm):2.756 Inch | 70 Millimeter x 5.906 Inch | 150 Millimeter x 2.5 Inch | 63.5 Millimeter ; |
| 6.299 Inch | 160 Millimeter x 9.449 Inch | 240 Millimeter x 1.496 Inch | 38 Millimeter CONSOLIDATED BEARING 7032 MG Angular Contact Ball Bearings | Pa:22.2 kN; Cap bolt:2 x 1-8 UNC; R1:79.375 mm; End plug (suffix Y):EPR 27; P150°:66.7 kN; R2:30.163 mm; P60°:185 kN; RG:1/2 NPT; ba:53.975 mm; Ca:72.619 mm; Size (mm):6.299 Inch | 160 Millimeter x 9.449 Inch | 240 Millimeter x 1.496 Inch | 38 Millimeter ; |
| 3.5 Inch | 88.9 Millimeter x 5 Inch | 127 Millimeter x 0.75 Inch | 19.05 Millimeter CONSOLIDATED BEARING XLS-3 1/2 AC Angular Contact Ball Bearings | S:0.794 mm; A:58.737 mm; H:117.872 mm; H2:34.925 mm; J min.:150.813 mm; Basic dynamic load rating C:84.5 kN; H1:57.15 mm; J max.:174.625 mm; Mass bearing unit:4.13 kg; da:50.8 mm; Size (mm):3.5 Inch | 88.9 Millimeter x 5 Inch | 127 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING QJ-210 C/3 Angular Contact Ball Bearings | R1:163.512 mm; Eye bolt:2 x 1/2-13 UNC; Labyrinth ring:2 x LOR 606; P180°:267 kN; A2:317.5 mm; R2:50.8 mm; H2:101.6 mm; ba:100.806 mm; da:265.113 mm; L:869.95 mm; Size (mm):1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter ; |
| 11.811 Inch | 300 Millimeter x 18.11 Inch | 460 Millimeter x 2.913 Inch | 74 Millimeter CONSOLIDATED BEARING 7060 MG Angular Contact Ball Bearings | ba:34.925 mm; H1:101.6 mm; A2:206.375 mm; h:38.1 mm; P60°:121 kN; J min.:260.35 mm; N1:22.225 mm; H2:41.275 mm; Bearing:1218 K; Cap bolt, SAE grade:5; Size (mm):11.811 Inch | 300 Millimeter x 18.11 Inch | 460 Millimeter x 2.913 Inch | 74 Millimeter ; |
| 8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter CONSOLIDATED BEARING QJ-1044 Angular Contact Ball Bearings | with tapered bore:700 min-1; with cylindrical bore:560 min-1; d:360 mm; Pu:4250 kN; Oil:571.310 kN; Dynamic (Cr):12 mm; rs (min):5 mm; D:600 mm; Static (Cor):22.3 mm; B:192 mm; Size (mm):8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter ; |
| 0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.394 Inch | 10 Millimeter CONSOLIDATED BEARING 7201 B Angular Contact Ball Bearings | Labyrinth ring:2 x LOR 160; Mass pillow block:160 kg; A1:171.45 mm; PosiTrac Plus contact element:2 x B10724-159; Initial grease fill:878.85 g; Ca:95.809 mm; Max. speed for PosiTrac Plus seal:800 r/min; H2:69.85 mm; Bearing:23040 CCK/W33; Pa:48.9 kN; Size (mm):0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.394 Inch | 10 Millimeter ; |
| 5.906 Inch | 150 Millimeter x 8.858 Inch | 225 Millimeter x 1.378 Inch | 35 Millimeter CONSOLIDATED BEARING QJ-1030 Angular Contact Ball Bearings | Grease Speed Rating n1:9500 rpm; Oil Speed Rating n2:14000 rpm; Basic Static Radial Load Rating Co:16600 N; B:28.00 mm; Fillet Radius rb:0.60 mm; D:47.0000 mm; d:20.000 mm; Basic Dynamic Radial Load Rating C:24200 N; Fillet Radius ra:1.00 mm; Size (mm):5.906 Inch | 150 Millimeter x 8.858 Inch | 225 Millimeter x 1.378 Inch | 35 Millimeter ; |
| 0.472 Inch | 12 Millimeter x 0.827 Inch | 21 Millimeter x 0.197 Inch | 5 Millimeter CONSOLIDATED BEARING 71801 Angular Contact Ball Bearings | Basic Dynamic Radial Load Rating C:23400 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:11000 rpm; Grease Speed Rating Open/Shielded n1:9000 rpm; D:75.0000 mm; d:45.000 mm; Basic Static Radial Load Rating Co:16600 N; Sealed Speed Rating n3:5600 rpm; B:16.00 mm; Fillet Radius ra:1.00 mm; Size (mm):0.472 Inch | 12 Millimeter x 0.827 Inch | 21 Millimeter x 0.197 Inch | 5 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING QJ-210 Angular Contact Ball Bearings | Basic dynamic load rating C:3690 kN; F:450 mm; r1,2 min.:5 mm; d:400 mm; K:9 mm; Basic static load rating C0:8300 kN; rb max.:4 mm; B:220 mm; da min.:420 mm; da max.:444 mm; Size (mm):1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter ; |
0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.591 Inch | 15 Millimeter CONSOLIDATED BEARING QJ-205 Angular Contact Ball Bearings Video