| 7032A5TRDULP3 NSK Super Precision Bearings | d:30 mm; Snap Ring Width:1.7 mm; Enclosure:Snap Ring Groove wit; Dynamic Load Rating:28,600 N; da:36 mm; Limiting Speed - Oil:9,500 rpm; Fillet Radius/Chamfer:1 mm; a (max):3.3 mm; Da:56 mm; B:23.8 mm; Dx:68.5 mm; Snap Ring Outside Diameter:67.7 mm; Limiting Speed - Grease:7,000 rpm; Configuration:Double Row; ra:1 mm; Bore Type:Cylindrical Bore; Cy:4.7 mm; Weight:0.290 kg; Static Load Rating:20,500 N; |
| 7936A5TRSUMP3 NSK Super Precision Bearings | s1:25.4 mm; B:42.9 mm; Mass bearing unit:1.3 kg; Limiting speed:1100 r/min; RG:1/4-28 UNF; Basic dynamic load rating C:25.5 kN; A3:3.2 mm; Housing:FY 507 M/VZ033; Housing material:Cast iron; A5:22 mm; Fatigue load limit Pu:0.655 kN; Thread grub screw G2:M6x0.75; A1:13 mm; J6:106 mm; Recommended tightening torque for grub screw:4 N·m; J:92 mm; A:34.5 mm; L:118 mm; J7:29 mm; T:46.4 mm; |
| 7928CTRSUMP3 NSK Super Precision Bearings | Db (max):166 mm; r1:1.1 mm; Configuration:Single Row; Enclosure:Open; Weight:2.470 kg; Radial Clearance:0.050 to 0.090 mm; Outside Ring Inside Diameter:165 mm; da (min):129 mm; ra1 (max):1 mm; db (min):127 mm; ra (max):2 mm; Bore Type:Cylindrical Bore; db (max):134 mm; Da (max):170 mm; dc (min):138 mm; D:180 mm; Limiting Speed - Oil:4,300 rpm; Dynamic Load Rating:139,000 N; d:120 mm; Fillet Radius/Chamfer:2 mm; |
| 90BTR10STYNDBLP4A NSK Super Precision Bearings | Dx (min):122 mm; Radial Clearance:0.030 to 0.058 mm; Enclosure:Single Shield with S; ra (max):1 mm; Bore Type:Cylindrical Bore; b (min):1.3 mm; Fillet Radius/Chamfer:1 mm; Da (max):110 mm; B:13 mm; Snap Ring Width:1.2 mm; Cy (max):2.9 mm; r1:0.5 mm; da (min):95 mm; Static Load Rating:19,700 N; a (max):2.1 mm; Dynamic Load Rating:19,000 N; Limiting Speed - Grease:5,400 rpm; Configuration:Single Row; |
| 7221A5TRSULP3 NSK Super Precision Bearings | Factor fo:16.1; Configuration:Single Row; da (min):49 mm; B:12 mm; Da (max):64 mm; Radial Clearance:0.018 to 0.036 mm; Bore Type:Cylindrical Bore; d:45 mm; Weight:0.122 kg; Static Load Rating:10,900 N; Dynamic Load Rating:14,100 N; Enclosure:Double Seal; ra (max):0.6 mm; Limiting Speed - Grease:5,600 rpm; Fillet Radius/Chamfer:0.6 mm; D:68 mm; |
| 7030A5TRSULP3 NSK Super Precision Bearings | l3 min.:80 mm; Basic static load rating C0:530 kN; h1:265 mm; dk:92 mm; d2 max.:162 mm; Basic dynamic load rating C:880 kN; l7 min.:80 mm; B:49 mm; l5 ≈:40 mm; Mass rod end:10.5 kg; d4 ≈:92 mm; α:6 °; G:M 72x4; r1 min.:1 mm; C1 max.:43 mm; l4 max.:349 mm; d:70 mm; Specific dynamic load factor K:300 N/mm²; w:85 mm; |
| 7224A5TRSULP3 NSK Super Precision Bearings | Fillet Radius/Chamfer:0.3 mm; Factor fo:14.2; da (min):12 mm; Dynamic Load Rating:2,120 N; Radial Clearance:0.008 to 0.023 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:37,000 rpm; Static Load Rating:985 N; Weight:0.005 kg; B:5 mm; Configuration:Single Row; Da (max):17 mm; d:10 mm; Enclosure:Double Shield; ra (max):0.3 mm; D:19 mm; |
| 7226CTRSULP3 NSK Super Precision Bearings | db (max):87 mm; D:150 mm; Weight:2.730 kg; Bore Type:Cylindrical Bore; dd (min):100 mm; db (min):82 mm; r1:2.1 mm; Enclosure:Open; ra (max):2 mm; Radial Clearance:0.065 to 0.100 mm; Limiting Speed - Grease:4,000 rpm; Configuration:Single Row; B:35 mm; dc (min):92 mm; ra1 (max):2 mm; Dynamic Load Rating:158,000 N; Da (max):138 mm; Static Load Rating:220,000 N; Limiting Speed - Oil:5,000 rpm; d:70 mm; |
| 7036A5TRDULP3 NSK Super Precision Bearings | Dynamic Load Rating:96,000 N; da:84 mm121 mm; d:75 mm; Configuration:Double Row; Fillet Radius/Chamfer:1.5 mm; Static Load Rating:85,500 N; Bore Type:Cylindrical Bore; D:130 mm; Limiting Speed - Grease:3,400 rpm; B:41.3 mm; Dx:141.5 mm; Enclosure:Open; Radial Clearance:0.025 to 0.051 mm; ra:1.5 mm; Weight:1.910 kg; Cy:6.5 mm; Limiting Speed - Oil:4,700 rpm; |
| 7936A5TRDUDLP3 NSK Super Precision Bearings | End plug (suffix Y):EPR 18; S:4.763 mm; PG:1/4 NPT; L:628.65 mm; Max. speed for PosiTrac Plus seal:950 r/min; ba:74.612 mm; h:54.769 mm; H2:69.85 mm; Eye bolt:2 x 3/8-16 UNC; H1:179.4 mm; Mass pillow block:168 kg; P60°:345 kN; Cap bolt, SAE grade:8; A1:171.45 mm; Housing:SSAFS 534; P150°:113 kN; Ca:95.809 mm; R2:37.306 mm; da:150.813 mm; R1:115.888 mm; |
| No. | Brand | d | D | b | K | B | F | s | w |
| 7926CTRDUDLP3 | NSK | 950 mm | - | - | - | 100 mm | - | - | - |
| 7030CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7032A5TRDUDLP3 | NSK | 320 mm | 480 mm | - | - | 160 mm | - | - | - |
| 7932A5TRDULP3 | NSK | 55 mm | - | - | - | 21 mm | - | - | - |
| 7928A5TRSULP3 | NSK | - | - | - | - | 80.169 mm | - | 38.497 mm | - |
| 7026CTRDUMP3 | NSK | 17 mm | 25 mm | - | - | 30 mm | - | - | - |
| 7222CTRSUMP3 | NSK | - | 190 mm | - | - | - | - | - | - |
| 7932A5TRDUDLP3 | NSK | 630 mm | - | - | - | 95 mm | - | - | - |
| 7034A5TRSUMP3 | NSK | 20 mm | - | - | - | - | - | - | - |
| 7920CTRDUMP3 | NSK | 22 mm | 56 mm | - | - | 16 mm | - | - | - |
| 7036A5TRDULP3 | NSK | 75 mm | 130 mm | - | - | 41.3 mm | - | - | - |
| 80BTR10STYNDBLP4A | NSK | 101.6 mm | 158.75 mm | 10.5 mm | - | - | - | - | - |
| 7030CTRSUMP3 | NSK | 30 mm | - | - | - | 13 mm | - | - | - |
| 7922CTRDULP3 | NSK | - | - | 5 mm | - | 20 mm | - | - | - |
| 7021A5TRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 7022A5TRDUDLP3 | NSK | - | 170 mm | - | - | 43 mm | - | - | - |
| 7930A5TRDULP3 | NSK | 40 mm | 90 mm | - | - | 36.5 mm | - | - | - |
| 7921CTRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7926CTRSULP3 | NSK | 600 mm | 1090 mm | - | - | 388 mm | - | - | - |
| 7930A5TRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 75BNR10STV1VSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 7034A5TRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7024A5TRSULP3 | NSK | 30 mm | - | - | - | 7 mm | - | - | - |
| 7224A5TRDUMP3 | NSK | 95 mm | 200 mm | - | - | 67 mm | - | - | - |
| 7930CTRDULP3 | NSK | 260 mm | - | - | - | 60 mm | 285 mm | - | - |
| 7224A5TRSULP3 | NSK | 10 mm | 19 mm | - | - | 5 mm | - | - | - |
| 7932CTRSULP3 | NSK | - | 290 mm | - | - | 80 mm | - | - | - |
| 7226A5TRSUMP3 | NSK | 6 mm | 14 mm | - | - | 12 mm | - | - | - |
| 7221CTRDULP3 | NSK | 36.512 mm | 76.2 mm | - | - | 28.575 mm | - | - | - |
50BER10STV1VSUELP3 NSK Super Precision Bearings Video
Super Precision Ball Bearings - NSK Americas
NSK Super Precision Bearings are designed to meet demanding needs of special applications including high accuracy, high rotational speed and high rigidity
Super Precision Bearings - the Schaeffler Group
FAG super precision bearings for main spindles stand for very high precision and absolute operational security. Innovative FAG spindle bearing solutions are
Super-precision bearings | SKF
With high running accuracy, high-speed performance and high system rigidity, SKF super-precision bearings are ideal for machine tools and other precision
Timken Fafnir Super Precision Bearings For Machine Tool
Timken super precision ball bearings meet the highest industry standards in tolerance levels (including ABEC 9). Designed for machine tool applications, our
Super Precision Bearings | Emerson Bearing
Super precision bearings are available in several different types, with each offering unique features and
Super Precision Bearings - Bearings | Nachi America
Super Precision Bearings. Nachi-Fujikoshi bearings business started out by using the superior materials made by the company and by applying expertise in
Super Precision Bearings | Products | NSK Global
Try out the new app! NSK has launched a free app primarily for precision bearings for machine tools. Scan 2D barcodes printed on NSK bearing boxes to assess
Super Precision Ball Bearings - NSK Europe
NSK Super Precision Bearings are designed to meet the requirements of demanding applications: high accuracy, high rotational speed and high rigidity
super precision bearings for machine tool applications - Coroll
Several types of Super Precision Bearings are available from NSK. These include the ROBUST series of high performance bearings, special series of bearings for
Precision Bearings | The Timken Company
Miniature and Super Precision. The quality steel, tolerances and features of Timken® miniature bearings meet demanding performance requirements. Our super