| 3 0980 02 Rollix Slewing Ring Bearings | d:4 mm; da max.:4.9 mm; B:3 mm; Basic static load rating C0:0.072 kN; D2 ≈:7.4 mm; Calculation factor f0:7.2; da min.:4.8 mm; Reference speed:150000 r/min; Da max.:7.5 mm; r1,2 min.:0.1 mm; Limiting speed:75000 r/min; ra max.:0.1 mm; Calculation factor kr:0.02; Mass bearing:0.00051 kg; Basic dynamic load rating C:0.225 kN; D:8 mm; Fatigue load limit Pu:0.003 kN; d1 ≈:5 mm; |
| 8 0270 04 Rollix Slewing Ring Bearings | R2:50.8 mm; P60°:449 kN; h:87.313 mm; da:182.563 mm; Cap bolt recommended tightening torque:1017 N·m; Mass pillow block:364 kg; J1:139.7 mm; RG:1 NPT; J min.:666.75 mm; H2:101.6 mm; P180°:185 kN; N1:41.275 mm; Housing:SAF 640; H1:250.825 mm; Initial grease fill:3515.4 g; Max. speed for PosiTrac Plus seal:800 r/min; P150°:151 kN; Eye bolt:2 x 1/2-13 UNC; H:495.3 mm; PosiTrac Plus contact element:2 x B10724-161; |
| 8 0405 05 Rollix Slewing Ring Bearings | N1:23.813 mm; A1:88.9 mm; Cap bolt recommended tightening torque:298.3 N·m; End plug (suffix Y):EPR 9; Taconite seal:TER 52; J min.:250.825 mm; L:330.2 mm; R2:22.225 mm; P90°:47.2 kN; P60°:78.7 kN; H2:38.1 mm; da:73.025 mm; P120°:28.9 kN; Housing:SAFS 517; RG:3/8 NPT; Max. speed for Taconite seal:1050 r/min; Stabilizing ring:SR-17-14; Appropriate attachment bolt size G:0.75 in; S:4.763 mm; |
| 33 0741 01 Rollix Slewing Ring Bearings | Axial static load carrying capacity:24 kN; h:2 mm; B:6 mm; Mass lock nut:0.025 kg; b:4 mm; G:M 20x1; Associated spanner:HN 4; d1:26 mm; d3:32 mm; |
| 23 0641 01 Rollix Slewing Ring Bearings | Lw:23.8 mm; r2 max.:0.8 mm; Mass needle roller:1.32 g; r1,2 min.:0.2 mm; r1 max.:0.6 mm; Dw:3 mm; |
| 7 0946 05 Rollix Slewing Ring Bearings | r1:0.5 mm; Dx (min):72 mm; Enclosure:Single Shield with S; D1 (max):66.7 mm; b (min):1 mm; Limiting Speed - Grease:10,000 rpm; Cy (max):2.3 mm; Bore Type:Cylindrical Bore; D:68 mm; Limiting Speed - Oil:12,000 rpm; Static Load Rating:10,900 N; Snap Ring Width:0.9 mm; Fillet Radius/Chamfer:0.6 mm; Weight:0.124 kg; a (max):1.7 mm; Configuration:Single Row; Factor fo:16.1; Da (max):64 mm; da (min):49 mm; |
| 11.50.3167.001.49.1502 Standard 5 Slewing Ring Bearings | Calculation factor f0:6.4; Basic dynamic load rating C:0.741 kN; B:5 mm; Fatigue load limit Pu:0.011 kN; Calculation factor kr:0.035; Da max.:11.5 mm; ra max.:0.2 mm; da min.:4.6 mm; da max.:5.9 mm; Basic static load rating C0:0.25 kN; d:3 mm; Mass bearing:0.0033 kg; D:13 mm; d2 ≈:6 mm; r1,2 min.:0.2 mm; Limiting speed:32000 r/min; D2 ≈:11.35 mm; |
| 11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings | D:520 mm; B:300 mm; Fatigue load limit Pu:800 kN; b:11.6 mm; d:350 mm; D1 ≈:467.95 mm; Mass bearing:220 kg; Basic static load rating C0:9000 kN; Design variant/feature:BC4.1/W33GWI; K:6 mm; Basic dynamic load rating C:4680 kN; α:20 °; r3,4 min.:5 mm; r1,2 min.:10 mm; F:401 mm; C:300 mm; |
| 121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | S:4.763 mm; N1:34.925 mm; J1:127 mm; R1:122.237 mm; Initial grease fill:2154.6 g; P90°:218 kN; Max. speed for Taconite seal:425 r/min; h:62.706 mm; Da:359.999 mm; P180°:145 kN; Cap bolt:4 x 7/8-9 UNC; J max.:635 mm; Pa:58.7 kN; P60°:364 kN; H:422.275 mm; L:749.3 mm; Cap bolt, SAE grade:5; P120°:136 kN; PG:1/4 NPT; A1:203.2 mm; |
| 191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | G:M 52x3; Basic static load rating C0:270 kN; d:50 mm; α:6 °; Material constant KM:330; B:35 mm; Mass rod end:4.1 kg; Basic dynamic load rating C:236 kN; dk:66 mm; C1 max.:31 mm; l4 max.:254 mm; h1:195 mm; l5 ≈:30 mm; r1 min.:0.6 mm; d4 ≈:70 mm; l7 min.:60 mm; l3 min.:68 mm; d2 max.:114 mm; Specific dynamic load factor K:150 N/mm²; w:60 mm; |
| No. | Brand | G | H | A | F | S | f | c | M |
| 191.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2915.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.50.2660.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 23 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 121.45.5000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 24 0941 01 | Rollix | - | 167.481 mm | - | - | - | - | - | - |
| 7 0946 05 | Rollix | - | - | - | - | - | - | - | - |
| 162.45.2510.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.45.3400.101.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 33 0741 01 | Rollix | M 20x1 | - | - | - | - | - | - | - |
| 11.40.3150.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.3150.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 1 0181 02 | Rollix | - | - | - | - | - | - | - | - |
| 12.50.3520.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 28 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 34 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 62.50.2800.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 121.32.3750.990.41.1502 | Standard 5 | 79.68 mm | - | - | - | - | - | - | - |
| 37 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 28 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 191.50.6735.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 38 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 191.40.4500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 3 0525 01 | Rollix | - | - | - | - | - | - | - | - |
| 36 0411 01 | Rollix | - | - | - | - | - | - | - | - |
26 0841 01 Rollix Slewing Ring Bearings Video
Submersible Wastewater Pump Type ABS AS 0530 - 0841
Pump Type ABS AS. 0530 - 0841. Robust, reliable submersible pumps from 1 to 3 kW for ... AS 0830, 0831, 0840 & 0841: radial slot DN 80 flange. ... S26/2.
Briggs and Stratton Engine | 12F802-0841-01 | eReplacementParts ...
Need to fix your 12F802-0841-01 Engine? Use our part lists, ... In Stock, 1 available ... Add to Cart. 26. Ring Set (.020 Oversize) Obsolete - Not Available.
0841/01 - year 6 English
ENGLISH. 0841/01. Paper 1. May/June 2008. MARK SCHEME. Maximum Mark : 45. IMPORTANT NOTICE. Mark Schemes have been issued on the basis of one copy per ...Missing: 26 | Must include: 26
26 0841 01 回转支承轴承- Rollix & 养贞交汇图| 养贞轴承
规格. 产品型号, 26 0841 01. 齿轮, 无齿轮. 几何学. 外径（D） (DR), 948. 内径(d)(d) (di), 734. 高度(H), 56. 重量(kg), 52. 安装孔. 外圈螺栓圆(Lo), 920.
* * UNIVERSITY OF CAMBRIDGE INTERNATIONAL ...
... OF CAMBRIDGE INTERNATIONAL EXAMINATIONS Cambridge International Primary Achievement Test ENGLISH 0841/01 Paper 1 ... 26 Many people 3 think that deserts.
26 0841 01 - Slewing Ring Bearings Manufacturers Suppliers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
20-0841 (CFMS) - Los Angeles City Clerk
01/27/2022, Homelessness and Poverty Committee transmitted Council File to Ad Hoc Committee on ... 01/26/2021, City Clerk transmitted file to Mayor.
Tract Maps - Land Records Information
Search by Tract Map Number (ex. 38680, 70974-01) ... Map Book 0241-0260, Map Book 0541-0560, Map Book 0841-0860, Map Book 1121-1140, Map Book 1401-1420.
26 0841 01 LILY Interchangeable From Rollix Slewing Ring ...
26 0841 01 Slewing Ring Bearings ; Height Of Overall Bearing Assembly (H), 56 mm ; Weight, 52 Kg ; Bolt Circle In Outer Ring (Lo), 920 mm ; Number Holes In Outer ...
Gamber Johnson 2011+ Dodge Durango and Jeep Grand Cherokee ...
Gamber Johnson 2011+ Dodge Durango and Jeep Grand Cherokee Pedestal Kit with Mongoose® 9" Locking Slide Arm 7170-0841-01.